Home > Products > Fiber Splice Closure > Dome Type Splice Closure

Contact Us

Head Office

6F-B Entrance, Block A, Jiajizhou Building, 71 of Baoan District, Shenzhen, China

Zip: 518100

Phone: +86-755-26511958

Fax: +86-755-26511956-801

Cell: +86-17603067633

Web: www.optic-solutions.com

Email: Jenny@optfocus.com


Shenzhen Factory

3F, Block 7, Tangtou 3rd Industrial Zone, Shiyan Street, Baoan District, Shenzhen, China

Zip: 518108

Phone: +86-755-26511956

Fax: +86-755-26511956-801

Cell: +86-17603067633

Web: www.optic-solutions.com

Email: optfocus005@optfocus.com

Dome Type Shrinkable Seal 1 Oval Port+2 Small Port 24 Fibers Mini Type

The package of this product adapts to any transportation ways. Avoid collision, drop, direct shower of rain & snow and insolation.

Product Details


The  OFS-SCV-9A  Dome  Fiber  Optic  Splice  Closure  are  closures  which accommodate the joint part of the cable, that can be used in manhole, in handhole, aerial-hanger, wall-mounting or be directly buried. Each splice case has three Cable Entry Ports.
The box is made from the high-quality PC and with the mechanical Sealing Structure filled with Silicon Gum Material. It can be opened after sealing and can be reused

●Direct Buried

OFS-OFS-SCV-9A  Fiber Optic Splice Closure Datasheet

Model No.


Dimension ( mm )

330 ×Φ85

Weight ( Kg )


Round Port ( mm )


Cable Entry Ports

2 & 2

Max Capacity of Cores Per Splice Tray

6 ( Single ) / 12 ( Single )

Max Capacity of Splice Trays/ Closure


Max Capacity

12 ( Single ) / 24 ( Single )

Sealing Structure of Cable Entry Port

Heat-shrinkable Sealing Structure

Sealing Structure of Box

Silicon Gum Material







Name: Splice Protective Tube
Type: FPS-01
Qty:According to the fiber cores


Name: Hanging Hook
Type:Aerial-hanging or Wall-mounting
Qty: 1 Set


Name: Cables Ties
Type: 3×100(mm)
Qty: 4×Splice Tray


Name: Heat-shrinkable Tube
Type: Φ50×150(mm)
Qty: 1 PCS


Name: Heat-shrinkable Tube
Type: Φ28×150(mm)
Qty: 2 PCS


Name: Branch Block
Qty: 1 PCS


Name: Marking Note
Type: Non-dry Glue
Qty: 4×Fiber Core


Name: Hose Clamp
Type: Φ8-Φ16(mm)
Qty: 4 PCS

Tools Required





Name: Blast Burner or Welding Gun
Qty: 1 PCS


Name: Saw
Qty: 1 PCS


Name: Pliers
Qty: 1 PCS


Name: Pliers
Qty: 1 PCS


Name: Minus Screwdriver
Qty: 1 PCS


Name: Cross-shaped Screwdriver
Qty: 1 PCS


Name: Scrubber
Qty: 1 PCS


Installation Steps




(0)Check product, Accessories and tools


(1) Saw the entry ports as need.







(2)Strip the cable as the requirement of installation, and put the heat-shrinkable tube on.


(3)Penetrate the stripped cable to the bracket through the entry ports.







(4) Bend the strengthen wire by pliers to fix it on the bracket.


(5)Fix the strengthen wire of the cable on the bracket by the cross-shaped screw driver.







(6) Fix the cable on the bracket by using the minus screwdriver to fast the clamp.


(7) Fix the fibers on the entry part of the splice tray by cables ties.







(8) Put the optic fiber on the splice tray after splicing and make noting.


(9) Put the dust cap of the splice tray on.







(10)Sealing of the cable and the base: clean the entry ports and cable with 10cm long by scrubber.


(11) Sand the cable and entry ports that need to heat-shrink by abrasive paper. Wipe the dust that be left after sanding away.







(12) Bound and even the heat-shrink part with aluminum paper to avoid burn caused by high temperature of blast burner.


(13) Put the heat-shrinkable tube on the entry ports, then, heating by blast burner and stop heating after it is tighten. Let it be cool naturally.




(14) Usage of branch folk: when heating the oval entry port, folking the heat-shrinkable tube to separate the two cables and heating it follow the steps above.


(15) Sealing: use clean scrubber to clean the base, the part to put silicone rubber ring and silicone rubber ring, then, put the silicone rubber ring on.




(16) Put the barrel on the base.


(17) Put on the clamp, run the ferris wheel to fix the base and barrel.




(18) When installing, fix the hanging hook as showing. Fix the closure with steel belt by minus screwdriver, and, fix another steel belt on the aerial-hanging pillar.

Transportation and Storage

(1)The package of this product adapts to any transportation ways. Avoid collision, drop, direct shower of rain & snow and insolation.

(2)Keep the product in a draughty and dry store, without corrosive gas in.

(3)Storage Temperature Range: -40℃ ~ +60℃

Optfocus Technology now brings you the best quality dome type shrinkable seal 1 oval port+2 small port 24 fibers mini type from its professional factory. Well-known as one of the leading manufacturers and suppliers of various fiber optical products in China, we can assure you of its good quality and excellent performance.



Each product is packed in a high quality PE bag, Then put into a box or carton and secured by 2 inserts.

Last put each box into pallets and properly wrapped for sea or air voyage.

Payment and Shipment


Standard payment terms: T/T 30% DEPOSIT,70% BANLANCE before shipping.

Online trade assurance order,all is up to you.

More payment terms could be provided(PAYPAL,WESTERN UNION,MONEYGRAM).


Delivery time:Generally it is 1-2 days if the goods are in stock,or it is 2-4 days if the goods are not in stock,it is according to quantity.



      CE Certificate                        CE Certificate                              FCC Certificate


Supplier Assessment Certificate                             ISO Certificate

Assessed by:                            


OPTFOCUS TECHNOLOGY Service Online/Offline

A. Payment Terms

1) PAYPAL, Western Union, T/T for samples

2) ESCROW, Ali-Secure, L/C, OA are negotiable

3) Drop-shipping available; Agent/Proxy are welcome!

B. Any inquiried will be replied within 24 hours

C. Professional manufacturer; Welcome to visit our website Http://www.optfocus.com

D. OEM/ODM service available

1) Customized panel display/design available

2) Packaging design offered

3) You think it , we make it!

E. High quality, reasonable/competitive price, fast lead time

F. After-sale Service

1) All fiber optical products had been full checked, one by one testing before packaging

2) All products are free from maintenance within warranty/guarantee period


Sales Department 




If you find our products interested, please fill the below blank space your detailed requirements. OPTFOCUSs team would offer different solutions to you within 12 hours. Free samples are also available.

Related Products