Home > Products > Fiber Splice Closure > In Line Type Splice Closure

Contact Us

Head Office

6F-B Entrance, Block A, Jiajizhou Building, 71 of Baoan District, Shenzhen, China

Zip: 518100

Phone: +86-755-26511958

Fax: +86-755-26511956-801

Cell: +86-17603067633

Web: www.optic-solutions.com

Email: Jenny@optfocus.com

          optfocus005@optfocus.com

Shenzhen Factory

3F, Block 7, Tangtou 3rd Industrial Zone, Shiyan Street, Baoan District, Shenzhen, China

Zip: 518108

Phone: +86-755-26511956

Fax: +86-755-26511956-801

Cell: +86-17603067633

Web: www.optic-solutions.com

Email: optfocus005@optfocus.com

Aerial Splice Box

The scope of application is: aerial, underground, wall-mounting, wall-mounting in duct and handhole.

Product Details

Horizontal Splice Closure

in line splice closure SCH-01J.jpg

inline type splice closure SCH-01J.jpg


Features

Excellent sealing performance,reusable. Protection grade is IP 68.

Installation Method: wall-mounted, aerial,pipe-lined,manhole

Feature:

Easy in operation and good in practicality.

Inner and external push button can insure good sealing,requirements of cable torque , stretching, pressure, bending.

Vulcanized sealing can meet the Φ8—Φ23 (mm)optical cable sealing needs with excellent re-package performance.

The ambient temperature ranges from -40 to +65℃.

Applications

The scope of application is: aerial, underground, wall-mounting, wall-mounting in duct and handhole.

OFS-SCH-01J  Fiber Optic Splice Closure Datasheet

Model No.

Size (mm) L×W×H

Core capacity

Cable Ports (max)

Max diameter of cable (mm)

Weight (excluding outside box)

OFS-SCH-01J

450x216x160 (mm)

96

6

Φ8—Φ23 (mm) (mm)

3100g-3800g

INSTALLATION METHODS 

in line splice clousre OFS-SCH-01J.png

Main components

No.

Name of components

Quantity

Usage

Remarks

1

Housing

1 set

Protecting fiber cable splices in whole

Internal diameter:

378x136 (mm)

2

Insert plate

2 pairs

Fixing the housing

175x56x30(mm)

3

Fiber optic splice tray

(FOST)

Max 8 pieces (bunchy) or 6pcs ( ribbon)

Fixing heat shrinkable protective sleeve and holding fibers

Suitable for:

Bunchy:12,24(cores) Ribbon:6 (pieces)

4

Foundation

1 set

Fixing reinforced core of fiber cable and fiber optic splice tray (FOST)


5

Seal fitting

1 set

Sealing between FOSC cover and FOSC bottom


6

Port plug

6 pieces

Sealing empty ports


7

Pressure

testing valve

1 set

After injecting air it is used for pressure testing and sealing testing

Configuration as per requirement

8

Earthing deriving device

1 set

Deriving metallic components of fiber cable in the FOSC for earthing

connection

Configuration as per requirement


The process of installing FOSC 


1  Step One - Open the closure

1.1 Cleaning the locale and determine where to install the FOSC and then place fiber 

cables required.

1.2 Check whether the main components and accessories have been well prepared

inside the package.

1.3 Open the closure

①. Demount the fixing bolt of insert plate with a special wrench. Put the fixing

bolt into the hole of screw thread next to the fixing hole of the insert plate and

push the insert plates out with the special wrench.

② Use the special wrench to demount all the locating bolts on the housing as

well as fixing bolts (it is also possible to install hanging hook depending on the

installation requirement) at four corners, then succeed in opening the closure. 

Important issues: If the weather condition is not good enough, then a tent must be pitched

for waterproof and dustproof. 


2  Step Two -Determine length of fiber cable to be fixed and stripped inside FOSC

2.1 ①. Fiber cable in 70mm length: the distance from seal fitting to fiber cable pressboard

   ②. Fiber cable in 2030mm length: it is used to be winded and spliced after stripping.

   ③. Fiber with protective coat in 430mm length: the distance from the fixing

point of fiber cable to the fixing point of FOST (fiber optic splice tray).

④. Fiber in 1600mm length: after stripping off the protective coat, it is to be winded

 inside the FOST after splicing with other fibers

Important issues:

1. Reserve enough length of fiber cable to be spliced.

2. Stripping length also could be decided by customer according to installation requirement.


3  Step Three – Strip off fiber protective coat of fiber cable and fiber

3.1  Strip off protective coat of fiber cable from the temp. locating mark with the  cutter and the stripper. Please refer to Drawing 2 for stripping length. Stripping length also could bedecided according to installation requirement 

Important issues: If it is difficult to pull all the protective coat of fiber cable at one time,

stript it off section by section to avoid fiber breakage.



PAYMENT & SHIPMENT

Packaging

in line splice closure packaging.JPG



Payment and Shipment

Payment

Standard payment terms: T/T 30% DEPOSIT,70% BANLANCE before shipping.

Online trade assurance order,all is up to you.

More payment terms could be provided(PAYPAL,WESTERN UNION,MONEYGRAM).

Shipping

Delivery time:Generally it is 1-2 days if the goods are in stock,or it is 2-4 days if the goods are not in stock,it is according to quantity.


CERTIFICATION

                          

      CE Certificate                        CE Certificate                              FCC Certificate


                              


Supplier Assessment Certificate                             ISO Certificate

Assessed by:                            


COMPANY INFORMATION

company.jpg

workshop.jpg

Sales Department 

Workshop

EXHIBITION 

CONTACT US  

If you find our products interested, please fill the below blank space your detailed requirements. OPTFOCUS’s team would offer different solutions to you within 12 hours. Free samples are also available.

Hot Tags: aerial splice box, China, factory, suppliers, manufacturers
Related Products

Feedback